Rocker Arm Oil Pressure Switch Removal/Installation

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the rocker arm oil pressure switch connector (A).

Fig 1: Identifying Rocker Arm Oil Pressure Switch & Connector With O-Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the rocker arm oil pressure switch (B).
Install the parts in the reverse order of removal with a new O-ring (C).