EGR Pipe Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cowl cover (see COWL COVER REPLACEMENT ) and the under-cowl panel (see UNDER-COWL PANEL REPLACEMENT ).
Remove the bolts (A) and the nuts (B).

Fig 1: Identifying EGR Pipe, Bolts & Nuts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the EGR pipe (C).