LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (SRS (Supplemental Restraint System)) >> Precautions and Procedures >> Spring-Loaded Lock Connector >> Side Airbag and Side Curtain Airbag Connectors >> Connecting

Side Airbag and Side Curtain Airbag Connectors: Connecting

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Hold both connector halves, and press them firmly together until the projection (A) of the sleeve-side connector clicks.

Fig 1: Identifying Projection Of Sleeve-Side Connector Clicks
G05960415Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals