Resetting individual Maintenance Item
WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the Honda Diagnostic System (HDS) to the data link connector (DLC) (see step 2 on GENERAL TROUBLESHOOTING INFORMATION ).
- Turn the ignition switch to ON (II).
- Make sure the HDS communicates with the vehicle and the engine control module/powertrain control module (ECM/PCM). If it doesn't communicate, troubleshoot the DLC circuit (see DLC CIRCUIT TROUBLESHOOTING ).
- Select GAUGES in the BODY ELECTRICAL with the HDS.
- Select ADJUSTMENT in the GAUGE MENU with the HDS.
- Select MAINTENANCE MINDER in the ADJUSTMENT with the HDS.
- Select RESET in the MAINTENANCE MINDER with the HDS.
- Select the individual maintenance item you wish to reset.