LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Exterior Lights) >> Fog Light Replacement >> 2009-11 Models

2009-11 Models

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the mounting screw, then pull out the fog light (A) from the front bumper.
    Fig 1: Identifying Fog Light
    G05960024Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the 2P connector (B), then remove the fog light.
  3. Install the light in the reverse order of removal.
  4. After replacement, adjust the fog lights.
scientia non olet · About LEMON Manuals