LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Exterior Lights) >> Bulb Replacement >> Fog Light

Fog Light

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fog light from the front bumper (see FOG LIGHT REPLACEMENT  ).
  2. Turn the bulb socket (A) 45° counterclockwise to remove it from the housing.

    2009-11 Models 

    Fig 1: Identifying Fog Light Bulb Socket (2009-11 Models)
    G05960023Courtesy of AMERICAN HONDA MOTOR CO., INC.

    The illustration shows the left side.

    2012 Model 

    Fig 2: Identifying Fog Light Bulb Socket (2012 Model)
    G00509568Courtesy of AMERICAN HONDA MOTOR CO., INC.

    The illustration shows the right side.

  3. Install a new bulb in the reverse order of removal.