LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Cylinder Head) >> Cylinder Head Cover Removal

Cylinder Head Cover Removal

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold chamber (see REMOVAL ).
  2. Disconnect the four ignition coil connectors (A).
  3. Remove the harness holder (B) and the breather hose (C).
    Fig 1: Identifying Ignition Coil Connectors, Harness Holder & Breather Hose
    G05952500Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the cylinder head cover.
    Fig 2: Identifying Cylinder Head Cover And Fasteners
    G05952501Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals