LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (HANDSFREELINK System) >> General Troubleshooting Information >> Clearing the HFL system >> Without navigation

Without navigation

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This operation clears the HFL system of all pass code(s), any paired phones, and all names in the HFL phonebook.
  • Clearing the HFL system is recommend before selling the vehicle.
  • If the system is locked and the pass code is lost or forgotten, see the symptom troubleshooting.
  1. Press and release the HFL TALK button. After the beep, say "System Setup Clear" and the HFL system responds, "This process will clear all paired phones, clear all entries in the phonebook, clear the security pass code and restore all defaults in the system setup. Is this what you would like to do?"
  2. Press and release the HFL TALK button. After the beep, say "Yes" and the HFL system responds, "Preparing to clear the system, which may take up to 2 minutes to complete. To proceed, press the talk button, and say continue. Otherwise say go back or cancel."
  3. Press and release the HFL TALK button. After the beep, say "Continue" to proceed, or say "Go back" or "Cancel."
  4. If you said "Continue," the HFL responds, "Please wait until the system is cleared." After a short period of time (up to 2 minutes) the HFL responds, "The system has been cleared."
scientia non olet · About LEMON Manuals