With navigation
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
The commands for deleting a phone can either be selected using the interface dial or by using the voice recognition system (use the TALK and BACK buttons).
NOTE:
- The entire HFL system cannot be deleted at once. You must delete one phone at a time.
- If the system is locked and the pass code is lost or forgotten, see symptom troubleshooting.
- Turn the ignition switch to ACC (I).
- Press the INFO button, and turn the interface dial to select Cellular Phone, then press ENTER.
- Move the interface dial down to select Phone Setup.
- Select Edit User, and press ENTER.
- Select Delete, then select the phone you want to delete from the list. Press ENTER to select the phone, then press ENTER again to confirm.
- Repeat steps 4- 5 for each phone you want to delete.