LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Ventilated Seats) >> Factory Mode >> Manual Activation Method

Manual Activation Method

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch to ON (II), then push and hold all four seat ventilation buttons for 2 seconds. After this sequence is accepted by the control unit, all indicators will turn on for 2 seconds.