Wireless remote control does not work (rear power button)
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the wireless remote control battery condition first.
- The audio-navigation unit main and REAR PWR must be ON before the wireless remote control power button will operate.
- You need to switch the audio-navigation unit REAR PWR button on for the rear display, remote controls, and sound to operate.
- Check the wireless remote control operation.
Does the audio-navigation unit indicate REAR PWR?
YES -Replace the wireless remote control.
NO -Go to step 2.
- Press the REAR PWR button on the audio-navigation unit.
Is the REAR PWR button on?
YES -Operation is normal at this time.
NO -Replace the wireless remote control battery , and recheck. If the symptom is still present, replace the wireless remote control.