LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Wiper System / Washer System) >> Wiper Blade Replacement >> Windshield

Wiper Blade Replacement: Windshield

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the wiper arms from the windshield.
    NOTE: Lift the driver's side first.
  2. Press and hold the tab (A) and slide the wiper assembly (B) toward the tab to release it from the wiper arm (C).
    Fig 1: Sliding Wiper Assembly Toward Tab
    G08055461Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Slide the wiper blade (A) out from the wiper assembly (B).
    Fig 2: Sliding Wiper Blade Assembly Out Of Wiper Assembly
    G08055462Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install a new wiper blade onto the wiper assembly in the reverse order of removal.
  5. Install the wiper assembly onto the wiper arm in the reverse order of removal.
  6. Check the wiper operation, if the blades slip, turn the wiper switch OFF, and reinstall the wiper blades securely.
scientia non olet · About LEMON Manuals