Rear Window

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Lift the wiper arm from the rear window.
Turn the rear wiper assembly (A), release the lock, and then remove the wiper assembly from the rear wiper arm (B).

Fig 1: Turning Rear Wiper Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Raise the old blade (A), and remove it from the wiper assembly (B).

Fig 2: Raising Old Blade From Wiper Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the new wiper blade and the wiper assembly in the reverse order of removal.

NOTE: After installation, confirm that the wiper arm works smoothly.