LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Wiper System / Washer System) >> Headlight Washer Nozzle Replacement >> Canada models

Canada models

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ), and disconnect the headlight washer tubes from the washer motor.
  2. Disconnect the headlight washer tube (A) from the headlight washer nozzle (B).
    Fig 1: Headlight Washer Nozzle With Torque Specifications
    G08055460Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the headlight washer nozzle cover (C).
  4. Remove the two screws and the headlight washer nozzle.
  5. Install the nozzle in the reverse order of removal. After installation, check the headlight washer operation.
scientia non olet · About LEMON Manuals