Glove Box Light Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the glove box stops and damper (see GLOVE BOX REMOVAL/INSTALLATION ).
Turn the bulb socket (A) 45 ° counterclockwise to remove it.
Glove Box Light: 1.4 W

Fig 1: Identifying Bulb Socket, Bulb And Lens
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bulb (B) from the socket.
If necessary, remove the lens (C).
Install the parts in the reverse order of removal.