LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Interior Lights) >> Driver's Ambient Light Replacement

Driver's Ambient Light Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Driver's dashboard undercover (see Driver's DASHBOARD LOWER COVER REMOVAL/INSTALLATION ), then disconnect the 2P connector from the Driver's ambient light (A).

    Driver's Ambient Light: LED 

    Fig 1: Removing Driver's Dashboard Undercover And 2P Connector From Driver's Ambient Light
    G08055370Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Turn the socket 45 ° counterclockwise to remove the light.
  3. Install the light in the reverse order of removal.
scientia non olet · About LEMON Manuals