Damper Replacement: Inspection

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.

Fig 1: Compressing Damper Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for oil leaks, abnormal noises, and binding during these tests.