LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Consoles) >> Center Console Side Pocket Replacement

Center Console Side Pocket Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the passenger's center console trim (see step  5 On ).
  2. Remove the screws, then remove the console side pocket (A) from the passenger's center console trim (B).
    Fig 1: Identifying Passenger's Center Console Trim, Console Side Pocket And Screws
    G08053351Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Separate the box (A) and the rail (B), then slide the console side lid (C) out.
    Fig 2: Identifying Console Side Lid, Box And Rail
    G08053352Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the pocket in the reverse order of removal.
scientia non olet · About LEMON Manuals