Canada models

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the driver's outer dashboard trim (see DRIVER'S OUTER DASHBOARD TRIM REMOVAL/INSTALLATION ).
Remove the VSA/BSI OFF switch (A).

Fig 1: Identifying VSA/BSI OFF Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each VSA/BSI OFF switch position according to the table.

Fig 2: Identifying Terminals And VSA/BSI Off Switch Position In Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Identifying VSA/BSI Off Switch 13P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, install a new switch in the reverse order of removal.