Blind Spot Information System (BSD Radar Unit Inputs and Outputs
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal number | Wire color | Terminal name | Description | Signal |
|---|---|---|---|---|
| 1 | BRN | BSI-CAN L | Radar CAN communication (low) circuit | --- |
| 2 | YEL | + B TECH (10 A) | Detects the ignition signal | Ignition switch ON (II): battery voltage Ignition switch OFF: about 0 V |
| 3 | YEL | BSI-CAN H | Radar CAN communication (high) circuit | --- |
| 4 | BLK | MPIO_0) | Digital address input line for radar ID | --- |
| 5 | BLK | GND | Ground circuit for the BSI radar unit | Less than 0.2 Vat all times |
| 6 | BLK | MPIO_1 | Digital address input line for radar ID | --- |