BSI OFF Switch
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
On Canada models, the BSI OFF switch and the VSA OFF switch are combined in one switch assembly.
Pressing and holding the button on the BSI OFF switch (A) at least 0.5 second turns the BSI system on or off.
To turn on the BSI system, press the button on the BSI OFF switch (A) when the ignition switch to ON (II). The BSI indicator in the gauge control module goes off and the BSI system indicates that it is turned on in the multi-information display (MID).
To turn off the BSI system, press the button on the BSI OFF switch again. The BSI indicator in the gauge control module comes on and the BSI system indicates that it is turned off in the MID.
NOTE:
The illustration shows BSI OFF switch (USA models).