How to Play the Bluetooth Audio: Procedure

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Push the USB/AUX button to select Bluetooth Audio source.
NOTE:
- If you push the USB/AUX button when no cell phone is connected, NO CONNECT is displayed.
- If you see NO CONNECT when you are using the cell phone music function, check that the device is properly paired. If it is paired, the cell phone may not be compatible. See www.acura.com/handsfreelink. for more information.
- Music titles and artist names are not displayed.
  
  Fig 1: Displaying - Bluetooth Audio Source
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Start playing the music in the paired cell phone.
NOTE: Depending on the cell phone, the music may start automatically, or the user may need to select headset as an audio output.

Fig 2: Playing Music In Paired Cell Phone Using Bluetooth
Courtesy of AMERICAN HONDA MOTOR CO., INC.
A user can select the next song or the previous song using the SKIP button.

Fig 3: Identifying Skip Button For Selection Of Next Or Previous Song
Courtesy of AMERICAN HONDA MOTOR CO., INC.
A user can select pause and resume by selecting [RESUME/PAUSE].

Fig 4: Identifying Resume/Pause Button
Courtesy of AMERICAN HONDA MOTOR CO., INC.

With Navigation

Fig 5: Identifying Sound Setup For Audio System (With Navigation)
Courtesy of AMERICAN HONDA MOTOR CO., INC.