Audio disc does not eject (without navigation)
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST ).
- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.
- Check the connectors for poor connections or loose terminals
- Turn the ignition switch to ON (II).
- Turn on the audio unit.
Does the system turn on?
YES -Go to step 3.
NO -Go to AUDIO UNIT POWER SWITCH WILL NOT TURN ON
- Check to see if the disc ejects correctly with no binding when you push the EJECT button.
Does the disc eject properly?
YES -Operation is normal.
NO -Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ). If the symptom/indication goes away, replace the original audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).