Satellite Speaker
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the quarter pillar trim (see QUARTER PILLAR TRIM ).
- Remove the speaker grille (A) and connector clip (B).
- Remove the screws and the satellite speaker (C).
- Measure the resistance between the terminals No. 1 and No. 2. There should be about 4 Ω.
- If the resistance is not as specified, replace the satellite speaker.