LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (TPMS (Tire Pressure Monitoring System)) >> Memorizing the Tire Pressure Sensor ID >> Memorizing a Tire Pressure Sensor ID Automatically

Memorizing a Tire Pressure Sensor ID Automatically

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

After rotating the tires or replacing a tire pressure sensor, drive the vehicle for at least 40 seconds at a speed of 15 mph (24 km/h) or more, and all the sensor IDs are memorized automatically.

NOTE:
  • When replacing the TPMS control unit, use the HDS to memorize IDs.
  • After the IDs are memorized, reduce the pressure in all four tires to less than the appropriate specification, and check to see that the four tire indicators come on.
scientia non olet · About LEMON Manuals