DTC 91, 93, 95, 97: Tire Pressure Sensor Internal Error
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0), then turn it to ON (II) again.
- Wait about 1 minute.
- Check for DTCs with the HDS.NOTE: The tire pressure sensor of the appropriate wheel is shown.
DTC Tire Location 91 Right-Front 93 Left-Front 95 Right-Rear 97 Left-Rear Is DTC 91, 93, 95 or 97 indicated?
YES -Replace the appropriate tire pressure sensor (see TIRE PRESSURE SENSOR REPLACEMENT ).
NO -The system is OK at this time.