LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Clutch) >> Clutch Replacement >> Engine Side >> Pilot Bearing Inspection

Pilot Bearing Inspection

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the crankshaft pilot bearing for wear and damage.
  2. Inspect the inside surface of the crankshaft pilot bearing with your finger. If the crankshaft pilot bearing is not smooth, replace it.
    Fig 1: Inspecting Inside Surface Of Crankshaft Pilot Bearing
    G05953322Courtesy of AMERICAN HONDA MOTOR CO., INC.