Removal and Installation: Installation
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the relay control module and relays, then connect the connectors to the under-hood fuse/relay box.
- Install the cover to the bottom of the under-hood fuse/relay box.
- Install the under-hood fuse/relay box and the removed parts in the reverse order of removal.
- Do the battery terminal reconnection procedure (see RECONNECTION ).
- Confirm that all systems work properly.