LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (EGR System) >> EGR Valve Replacement

EGR Valve Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 6 on page 5-2).
  2. Remove the main under-hood fuse box.
  3. Disconnect the EGR valve 5P connector (A).
    Fig 1: EGR Valve 5P Connector And Gasket With Torque Specifications
    G08052638Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the EGR valve (B).
  5. Install the parts in the reverse order of removal with a new gasket (C).
scientia non olet · About LEMON Manuals