LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Adaptive Cruise Control (Acc)) >> System Description >> Millimeter Wave Radar Inputs and Outputs

Millimeter Wave Radar Inputs and Outputs

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Millimeter Wave Radar 5P Connector Terminals
G08058563Courtesy of AMERICAN HONDA MOTOR CO., INC.
Terminal number Wire color Terminal name Description Signal
1 YEL + B TECH (10 A) Power supply for millimeter wave radar Ignition switch ON (II): battery voltage Ignition switch OFF: about 0 V
4 BLK GND Ground for millimeter wave radar Less than 0.2 V at all times
5 RED M/R TRX Communicates with the ACC unit Ignition switch ON (II): battery voltage Ignition switch OFF: about 0 V