Front Brake Fluid Pressure Sensor Inputs and Outputs
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
RIGHT FRONT BRAKE FLUID PRESSURE SENSOR (GRY)
| Terminal number | Wire color | Terminal name | Description | Signal |
|---|---|---|---|---|
| 1 | GRN | SG | Ground for front brake fluid pressure sensor | Less than 0.2 V at all times |
| 2 | ORN | VCC | Provides sensor voltage | Ignition switch ON (II): about 5V Ignition switch OFF: about 0V |
| 3 | BLK | PRESS FR | Detects the front brake fluid pressure sensor signal | Ignition switch ON (II): about 0.5 - 4.5V Ignition switch OFF: about 0V |
LEFT FRONT BRAKE FLUID PRESSURE SENSOR (BLU)
| Terminal number | Wire color | Terminal name | Description | Signal |
|---|---|---|---|---|
| 1 | GRN | SG | Ground for front brake fluid pressure sensor | Less than 0.2 V at all times |
| 2 | ORN | VCC | Provides sensor voltage | Ignition switch ON (II): about 5V Ignition switch OFF: about 0V |
| 3 | BLU | PRESS FL | Detects the front brake fluid pressure sensor signal | Ignition switch ON (II): about 0.5 - 4.5V Ignition switch OFF: about 0V |