LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (SRS (Supplemental Restraint System)) >> System Description >> SRS Unit Inputs and Outputs at Connector B (39P)

SRS Unit Inputs and Outputs at Connector B (39P)

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: SRS Unit Inputs And Outputs At Connector 39P Terminals (2 Of 2)
G08058298Courtesy of AMERICAN HONDA MOTOR CO., INC.
Terminal Number Wire Color Terminal Name Description
1 GRN(1) ODS Sends and receives communication signal with the ODS unit
6 RED(1) LSA- Ground for the driver's side airbag inflator
7 GRN(1) LSA+ Power source for the driver's side airbag inflator
8 BLU(1) RSA- Ground for the front passenger's side airbag inflator
9 WHT(1) RSA+ Power source for the front passenger's side airbag inflator
10 BLU(1) LCA1- Ground for the left side curtain airbag inflator
11 BRN(1) LCA1 + Power source for the left side curtain airbag inflator
12 BRN(1) LRP- Ground for the driver's seat belt tensioner
13 RED(1) LRP+ Power source for the driver's seat belt tensioner
14 LT BLU(1) RRP- Ground for the front passenger's seat belt tensioner
15 GRN(1) RRP+ Power source for the front passenger's seat belt tensioner
19 YEL(1) LBSC Driver's seat belt buckle switch unbuckled signal
20 WHT(1) LBSO Driver's seat belt buckle switch buckled signal
21 BLU(1) RBSC Front passenger's seat belt buckle switch unbuckled signal
22 ORN(1) RBSO Front passenger's seat belt buckle switch buckled signal
23 BLU(1) SS+ Driver's seat position sensor
24 RED(1) RCA1- Ground for the right side curtain airbag inflator
25 GRY(1) RCA1 + Power source for right side curtain airbag inflator
26 BLU(1) SSS- Ground for the rear safing sensor
27 RED(1) SSS + Power source for the rear safing sensor
36 GRY(1) LBS1 - Ground for the left side impact sensor (first), left side impact sensor (second)
37 PNK(1) LBS1 + Power source for the left side impact sensor (first), left side impact sensor (second)
38 LT GRN(1) RBS1- Ground for the right side impact sensor (first), right side impact sensor (second)
39 BRN(1) RBS1 + Power source for the right side impact sensor (first), right side impact sensor (second)
(1) Wire colors may be substituted in this table.