LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Exterior Lights) >> Taillight Replacement >> Inner Taillight

Inner Taillight

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
  2. Disconnect the 2P connector (A) from the inner taillight (B).
    Fig 1: Disconnecting 2P Connector From Inner Taillight
    G08055332Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the five nuts, then remove the inner taillight.
  4. Install the light in the reverse order of removal.
scientia non olet · About LEMON Manuals