Diagnosis Procedure
- CHECK OIL PRESSURE WARNING LAMP
Perform auto active test. Refer to "DIAGNOSIS DESCRIPTION " (With I-KEY) or "DIAGNOSIS DESCRIPTION " (Without I-KEY).
Is oil pressure warning lamp blinking?
YES >> GO TO 2.
NO >> GO TO 4.
- CHECK OIL PRESSURE SWITCH SIGNAL CIRCUIT
Check the oil pressure switch signal circuit. Refer to "Diagnosis Procedure ".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair harness or connector.
- CHECK OIL PRESSURE SWITCH
Perform a unit check for the oil pressure switch. Refer to "Component Inspection ".
Is the inspection result normal?
YES >> Replace IPDM E/R.
NO >> Replace oil pressure switch.
- CHECK COMBINATION METER INPUT SIGNAL
Connect CONSULT and perform an input signal check for the combination meter. Refer to "Component Function Check ".
Is the inspection result normal?
YES >> Replace combination meter.
NO >> Replace IPDM E/R. Refer to "REMOVAL AND INSTALLATION " (With I-KEY) or "REMOVAL AND INSTALLATION " (Without I-KEY).