Component Inspection

REMOVE FUEL LEVEL SENSOR UNIT
Remove the fuel level sensor unit. Refer to "REMOVAL AND INSTALLATION ".

>> GO TO 2.

CHECK FUEL LEVEL SENSOR UNIT

Check the resistance between fuel level sensor unit and fuel pump.

Terminals

Condition

Resistance (Ω) (Approx.)

Height [mm (in)]

Fuel level sensor unit

Full⁽¹⁾ (A)

5.0

165.7 (6.5)

Empty⁽¹⁾ (B)

81.5

21.1 (0.83)

⁽¹⁾	When float rod is contact with stopper.

Is inspection result OK?

YES >> INSPECTION END

NO >> Replace fuel level sensor unit and fuel pump. Refer to "REMOVAL AND INSTALLATION ".

Fig 1: Checking Resistance Between Fuel Level Sensor Unit And Fuel Pump

Courtesy of NISSAN NORTH AMERICA, INC.