| Combination meter |
Controls the information display according to the signal received from each unit. |
| Fuel level sensor unit |
Refer to
"DESCRIPTION ". |
| ECM |
Transmits the following signals to the combination meter via CAN communication line.
- Engine speed signal
- Fuel consumption monitor signal
- Loose fuel cap signal
|
| ABS actuator and electric unit (control unit) |
Transmits the vehicle speed signal to the combination meter via CAN communication line. |
| BCM |
Transmits signals provided by various units to the combination meter via CAN communication line. |
| Washer level switch |
Transmits the washer level signal to the combination meter. |
| Parking brake switch |
Refer to
"DESCRIPTION ". |
| Door switch |
Transmits the door switch signals to BCM. |
| Trunk lamp switch and trunk release solenoid |
Transmits the trunk switch signal to BCM. |
| IPDM E/R |
Transmits the ambient sensor signal received from the ambient sensor to the combination meter. |
| Ambient sensor |
Detects the ambient temperature and transmits the ambient sensor signal to the IPDM E/R. |