DTC Index
| CONSULT display | Malfunction | Reference |
|---|---|---|
| CAN COMM CIRC [U1000] | Malfunction is detected in CAN communication.
CAUTION:
Even when there is no malfunction on CAN communication system, malfunction may be misinterpreted when battery has low voltage (when maintaining 7 - 8 V for about 2 seconds) or 10A fuse [No. 19, located in the fuse block (J/B)] is disconnected.
|
DTC U1000 CAN COMMUNICATION |
| VEHICLE SPEED CIRC [B2205] | Malfunction is detected when an erroneous speed signal is input.
CAUTION:
Even when there is no malfunction on speed signal system, malfunction may be misinterpreted when battery has low voltage (when maintaining 7 - 8 V for about 2 seconds).
|
DTC B2205 VEHICLE SPEED CIRCUIT |
NOTE:
"TIME" indicates the following.
- 0: Indicates that a malfunction is detected at present.
- 1-63: Indicates that a malfunction was detected in the past. (Displays number of ignition switch OFF → ON cycles after malfunction is detected. Self-diagnosis result is erased when "63" is exceeded.)