LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Altima Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> DTC/Circuit Diagnosis >> Washer Level Switch Signal Circuit >> Component Function Check

Component Function Check

  1. COMBINATION METER INPUT SIGNAL
    1. Select "METER/M&A" on CONSULT.
    2. Monitor "WASHER W/L" of "DATA MONITOR" under the following conditions.

      WASHER W/L 

      Washer fluid level low: ON 

      Washer fluid level other: OFF 

      Inspection End.

scientia non olet · About LEMON Manuals