Diagnosis Procedure: Sedan

CHECK PARKING BRAKE SWITCH CIRCUIT
1. Disconnect combination meter connector and parking brake switch connector.
2. Check continuity between combination meter harness connector M24 (A) terminal 26 and parking brake switch harness connector M73 (B) (with M/T) or E35 (B) (with CVT) terminal 1.
  26 - 1: Continuity should exist.
  
  Fig 1: Checking Parking Brake Switch Circuit
  Courtesy of NISSAN NORTH AMERICA, INC.
3. Check continuity between combination meter harness connector M24 (A) terminal 26 and ground.
  26 - Ground: Continuity should not exist.
  
  Is the inspection result normal?
  
  YES: Inspection End.
  
  NO: Repair harness or connector.