Diagnosis Procedure: Coupe

CHECK PARKING BRAKE SWITCH CIRCUIT
1. Disconnect combination meter connector and parking brake switch connector.
2. Check continuity between combination meter harness connector M24 (A) terminal 26 and parking brake switch harness connector M108 (B) terminal 1.
  26 - 1: Continuity should exist.
3. Check continuity between combination meter harness connector M24 (A) terminal 26 and ground.
  26 - Ground: Continuity should not exist.
  
  Fig 1: Checking Parking Brake Switch Circuit
  Courtesy of NISSAN NORTH AMERICA, INC.
  
  Is the inspection result normal?
  
  YES: Inspection End.
  
  NO: Repair harness or connector.