LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Altima Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> DTC/Circuit Diagnosis >> Fuel Level Sensor Signal Circuit >> Component Function Check

Component Function Check

  1. COMBINATION METER INPUT SIGNAL
    1. Select "METER/M&A" on CONSULT.
    2. Using "FUEL METER" of "DATA MONITOR", compare the value of DATA MONITOR with fuel gauge pointer of combination meter.
      Fuel gauge pointer Reference value of data monitor [lit.]
      Full Approx. 68
      3/4 Approx. 56
      1/2 Approx. 38
      1/4 Approx. 22
      Empty Approx. 4

      Does the data monitor value approximately match the fuel gauge indication? 

      YES: Inspection End.

      NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals