Diagnosis Procedure

Symptom: Displays "VEHICLE SPEED CIRC [B2205]" as a self-diagnosis result of combination meter.

1. CHECK COMBINATION METER INPUT SIGNAL
   1. Start engine and select "METER/M&A" on CONSULT.
   2. Using "SPEED METER" on "DATA MONITOR", compare the value of DATA MONITOR with speedometer pointer of combination meter. Speedometer and DATA MONITOR indications should be close.

      Is the inspection result normal? 

      YES: Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to "CONSULT FUNCTION (ABS) " (with VDC) "CONSULT FUNCTION (ABS) " (without VDC).

      NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".