LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Altima Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> DTC/Circuit Diagnosis >> Ambient Sensor Signal Circuit >> Component Function Check

Component Function Check

  1. COMBINATION METER INPUT SIGNAL
    1. Select "METER/M&A" on CONSULT.
    2. Using "OUTSIDE TEMP" on "DATA MONITOR", compare the value of DATA MONITOR with temperature display on combination meter. DATA MONITOR and combination meter indications should be close.

      Does the data monitor value approximately match the display on the combination meter? 

      YES: Inspection End.

      NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals