LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (Qr25DE) >> Service Information >> Thermostat And Thermostat Housing >> Removal and Installation >> Removal

Removal and Installation: Removal

CAUTION: Perform when the engine is cold.
  1. Drain engine coolant from the radiator. Refer to "CHANGING ENGINE COOLANT ".
  2. Remove front air duct. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove radiator hose (lower) from the engine coolant inlet side.
  4. Remove engine coolant inlet, O-ring and thermostat.
scientia non olet · About LEMON Manuals