LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Manual Transmission - RS6F52H) >> Service Information >> Transaxle Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove clutch tube from CSC. Refer to "REMOVAL AND INSTALLATION ".
    CAUTION: Do not depress clutch pedal during removal procedure.
    NOTE: Cap or plug opening(s) to prevent fluid from spilling.
  2. Remove engine and transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove starter motor. Refer to "REMOVAL AND INSTALLATION QR25DE ".
  4. Remove transaxle assembly to engine bolts.
  5. Separate transaxle assembly from engine.
scientia non olet · About LEMON Manuals