Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

Install differential side oil seal to clutch housing and transaxle case to the specified dimension (A) using Tools.
Dimension A) : -0.5 - 0.5 mm (-0.020 - 0.020 in)

Tool numbers : ST30720000 (J-25405)

: ST33400001 (J-26082)

Fig 1: Installing Differential Side Oil Seal To Clutch Housing And Transaxle Case
Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION: Do not reuse oil seal.
Check oil level after installation. Refer to "CHECKING M/T OIL ".