Differential Side Gear Thrust Washer
WARNING: This page is about a different variant/trim than selected.
DIFFERENTIAL SIDE GEAR THRUST WASHER SPECIFICATIONS
| Allowable Clearance between side gear and differential case with thrust washer | 0.1 - 0.2 mm (0.004 - 0.008 in) |
DIFFERENTIAL CASE SPECIFICATIONS
| Thickness mm (in) | Part number(1) | ||
|---|---|---|---|
| 0.75 (0.0295) | 38424 81X00 | ||
| 0.80 (0.0315) | 38424 81X01 | ||
| 0.85 (0.0335) | 38424 81X02 | ||
| 0.90 (0.0354) | 38424 81X03 | ||
| 0.95 (0.0374) | 38424 81X04 | ||
|
|||