MAINSHAFT Rear Bearing Adjusting Shim
WARNING: This page is about a different variant/trim than selected.
MAINSHAFT REAR BEARING ADJUSTING SHIM SPECIFICATIONS
| End play standard value | 0 - 0.06 mm (0 - 0.0024 in) | ||||
|---|---|---|---|---|---|
| Thickness mm (in) | Part number(1) | Thickness mm (in) | Part number(1) | ||
| 0.44 (0.0173) | 32238 8H510 | 0.80 (0.0315) | 32238 8H519 | ||
| 0.48 (0.0189) | 32238 8H511 | 0.84 (0.0331) | 32238 8H520 | ||
| 0.52 (0.0205) | 32238 8H512 | 0.88 (0.0346) | 32238 8H521 | ||
| 0.56 (0.0220) | 32238 8H513 | 0.92 (0.0362) | 32238 8H522 | ||
| 0.60 (0.0236) | 32238 8H514 | 0.96 (0.0378) | 32238 8H523 | ||
| 0.64 (0.0252) | 32238 8H515 | 1.00 (0.0394) | 32238 8H524 | ||
| 0.68 (0.0268) | 32238 8H516 | 1.04 (0.0409) | 32238 8H525 | ||
| 0.72 (0.0283) | 32238 8H517 | 1.08 (0.0425) | 32238 8H561 | ||
| 0.76 (0.0299) | 32238 8H518 | ||||
|
|||||