LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Manual Transmission - RS6F52H) >> Service Information >> Reverse Idler Shaft And Gears >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove reverse idler gear (rear), reverse coupling sleeve, and reverse insert springs simultaneously.
  2. Remove reverse idler gear needle bearing.
  3. Remove thrust needle bearing.
  4. Remove reverse baulk ring.
  5. Remove reverse idler gear (front).
  6. Remove reverse idler gear needle bearing.
  7. Remove thrust needle bearing.
  8. Remove retaining pin from reverse idler shaft.
scientia non olet · About LEMON Manuals