Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

Securely install each cable to shifter lever and selector lever.
Be careful about the installation direction, and screw shift selector knob onto shift selector.
<=: Front

Fig 1: Installing Cable To Shifter Lever And Selector Lever
Courtesy of NISSAN MOTOR CO., U.S.A.
When shift selector is selected to 1st-2nd side and 5th-6th side, confirm shift selector returns to neutral position smoothly.
When shift selector is shifted to each position, make sure there is no binding or disconnection in each boot.